Industrial Controls

Industrial Control Systems and Components. Heavy focus on Electro-mechanical and HMI components for...

Industrial Control Systems and Components. Heavy focus on Electro-mechanical and HMI components for Industrial Control Panels. Enclosures, Circuit Protection, Connectors, Relays, Pilot Devices, Sensors, Signal Conditioning, Switches, etc. Supervisory systems and Protocols such as ICS, SCADA, PLC, DCS, and RTU. Applications include; Agriculture, Biotech, Chemicals, Data Processing, Energy Production, Food and Beverage, Mining, Oil & Gas, Package Handling, Pharmaceuticals, Semiconductor Tooling, SCADA, Transportation, Water Processing, Utilities and many more.


Warning: strstr(): Empty needle in /home/target/public_html/store/tools/smarty/sysplugins/smarty_internal_templatebase.php(157) : eval()'d code on line 607


  • Timers

    Programmable Analog and Digital Time Switches turn on or off at specific times. Can be used to precisely track or reference astronomical processes weekly, daily, hourly or even in seconds.

  • Signal Conditoners

    Isolated Signal Converters for conversion of electrical signals. Also used to assist I/O configurations such as measuring, conditioning, transmitting, and amplification.  

  • Terminal Blocks - Din Rail mount

    The terminal block is an electrical connector where multiple wires can be clamped down and connected via jumpers. The circuits can then be manipulated and distributed to other points within an electrical system. Special designed terminal blocks containing capacitors, diodes, varsitors and other accessories are designed to perform additional tasks such as surge protection, grounding, signal distribution, fusing, and disconnect to name a few.

  • Loop Powered Isolators & Loop Repeaters

    Industrial process control typically uses 4–20 mA analog signals for controlling a physical process. These current loops are used to signal devices such as sensors, transducers, and valves. The signal value of 4 ... 20 mA represents 0-100% of the measurement range for the control signal. These loops are used for both carrying information to and from the sensor or field instruments.

  • Displays

    LCD and TFT disply used to project text and graphic images from the computer to the interface user. Monitors are typically touch screen and programmable for use in specific industrial applications. Process Controls, HMI, Kiosk, ATM, and POS are the most common.

  • Enclosures

    Standard and Custom Electrical Enclosures for use in; Agricultural Systems, Battery Storage, Breweries, Food and Beverage Processing, Chemical Processing, Environmental and Clean Rooms, Gas Monitoring, Industrial Manufacturing,Material Handling, Oil exploration/refining/pumping systems, Outdoor Landscaping, Pump and Slurry systems, Rail/Transit Systems, Renewable Energy, Visual Architecture, Water Treatment, and Semiconductor Industries.

  • Encoders

    Encoders are used to translate rotary or linear motion into a digital signal. Usually this is for the purpose of monitoring or controlling motion parameters such as speed, rate, direction, distance or position.

  • Analog and Discrete I/O, PLC, DCS, Ethernet

    There are two types of Input and Output Devices. Discrete (digital) input devices simply provide on/off information. Analog devices detect a value within a range. A PLC is an industrial digital computer which has been adapted for the control of industrial processes, usually easy to program and in small din rail mount packagesIndustrial Ethernet is data being sent back and forth in the form of packets to regulate the transmission of the packets, different technologies can be used. The most widely used LAN technology is the Ethernet and it is specified in a standard called IEEE 802.3

  • Signal Converters for Standard Analog Signals

    0-10V, 0-20mA, 4-20mA signal converters

  • Potentiometers (Trim Pot)

    Usually a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. If only two terminals are used, one end is the wiper, it acts as a variable resistor or rheostat.

  • Fans
  • Fuses
  • Indicators
  • Lamps
  • Fieldbus

    Connects all the internal data of a particular system (CPU, IPC, DCS, PLC, etc.) with sensors, switches, and other industrial components. Especially useful in safety related applications (SIS and SIL). Internal data buses are also referred to as a local bus, because they are intended to connect to local devices.

  • Light Curtains
  • Magnetic Sensors
  • Connectors
  • Isolation Amplifiers
  • Power Supplies
  • Relays
  • Sensors / Transducers
  • Solenoids

    A cylindrical coil of wire acting as a magnet when electric current is applied the shaft or piston either extends or retracts. This allows for many mechanical applications, but especially useful in valves.

  • Switches - Industrial
  • Wire Duct
  • Panel Mount Hardware

    Battery Holders, Handles, Hinges, Housings, Bezels, Instrument Cases, Knobs, Fan Guards and other misc. outer panel hardware

  • Power Cords / IEC Power entry

Products by page

Products by page

Contact us


Request Quotation
Target Electronics Inc.
16120 Caputo Dr.
Morgan Hill, CA 95037